MATERIALS: Stainless Steel, Type 300 Series, nickel-bearing.
GAUGES: 14 gauge
CONTRUCTION: Blickman 9800 Series Lodi Scrub Sinks are built with seamless construction, with 1" (2.54) coved corners. Bowls are 9-1/4" (23.495) deep at rim and 18-1/2" (46.99) from spout to drain allowing for a deep scrub area. The spout is positioned toward the rear of the sink to divert water splash away from the operator. Undersides of the bowl are sound deadened and enclosed by double walled end panels. Each sink houses a stainless steel base that will house an infra-red sensor and knee panels for manual operation. The housing extends 21" (53.34) from the basin and hangs 14-12" (36.83) from finished floor. Sink supplied with wall mounting brackets. (Refer to installation manual). Sinks provide scrub areas approximately 30" (76.20) wide x 21-1/2" (54.61) deep, swivel gooseneck faucet, adjustable thermostatic mixing valve, check stop strainer, infra-red sensor, flow control valve, 1-1/2" (3.81) Strainer and tailpiece.
WELDING: All welding is accomplished by heli-arc method. All exposed welds ground smooth.
FINISH: All exposed stainless steel surfaces are free from pit marks, weld seams and scale, and polished to a No. 4 satin finish.
|96" x 27-1/4" x 39-1/4"|